Kaikki tuotteemme

Hi-Speed National Match Triggers Geissele currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference.

The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective option of the SSA. The G2S is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.

The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.

The Airborne Charging Handle (ACH) was developed at the request of an elite organization famous for its expertise in aerial insertion. The organization requested a lower profile lever design to reduce the chances of snagging. The ACH’s lower profile design is especially ideal for rifles where the primary sighting system is a red dot or similar low profile optic system. The ambidextrous ACH is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Shortened levers are dual contoured with gently concaved radius cuts in the vertical and horizontal planes. The handling surfaces of the levers are checkered for confident operation while wearing gloves. A taller fence at the rear of the ACH aids in redirecting gas blow back when shooting with short barreled and suppressed weapon systems. The ACH and its components are Type 3 Hard coat anodized and are available in Black and DDC (Desert Dirt Color).

Designed in cooperation with Jeff Gonzales former Navy SEAL of Trident Concepts, the Super Tricon Trigger comes standard with a two-stage design for safety and control; a carrot-like 2nd stage break; full-power hammer spring; tool steel construction; and unique trigger bow design with ribbed surface.

The S3G trigger has a very short, light pull and reset. Not recommended for duty use, bench rest, accuracy work or shooting small groups. It is designed for close course competition use where rapid target engagement with quick follow up shots are required.

The Airborne Charging Handle (ACH) was developed at the request of an elite organization famous for its expertise in aerial insertion. The organization requested a lower profile lever design to reduce the chances of snagging. The ACH’s lower profile design is especially ideal for rifles where the primary sighting system is a red dot or similar low profile optic system. The ambidextrous ACH is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Shortened levers are dual contoured with gently concaved radius cuts in the vertical and horizontal planes. The handling surfaces of the levers are checkered for confident operation while wearing gloves. A taller fence at the rear of the ACH aids in redirecting gas blow back when shooting with short barreled and suppressed weapon systems. The ACH and its components are Type 3 Hard coat anodized and are available in Black and DDC (Desert Dirt Color).

The Geissele Super Gas Block is a low profile gas block, designed to fit under most free floating handguards. Precision investment cast from 17-4 precipitation hardening stainless steel, the gas block provides corrosion resistance and strength to withstand thousands of rounds and never let you down.

High quality components and precise manufacturing make Geissele parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

The Geissele Ultra Duty Lower Parts Kit is made for the most demanding operators and includes all the internal parts necessary to complete or rebuild your lower receiver. Key components are made from Stainless Steel, which offers a much longer life-span and a much lower chance of rusting or failing in extreme conditions or under heavy use. The Geissele Ultra Duty LPK includes our Maritime Bolt Catch, famous for its aggressive texturing and extended paddles, and our Ambidextrous Super Configurable Safety, which features the ability to easily and securely swap and exchange the safety levers plus provides the end user a satisfying and positive tactile feedback when the safe or fire position is engaged. The takedown pins and mag release button feature the same tank treading as the Maritime Bolt Catch, giving your rifle a tasteful and cohesive look. Included in the Ultra Duty LPK is Geissele’s Ultra Precision Trigger Guard, 5-axis machined out of a solid block of billet 7075 -T6 aluminum and Type-3 hardcoat anodize to ensure that your build stands apart from any other.

The Geissele Ultra Duty Lower Parts Kit is made for the most demanding operators and includes all the internal parts necessary to complete or rebuild your lower receiver. Key components are made from Stainless Steel, which offers a much longer life-span and a much lower chance of rusting or failing in extreme conditions or under heavy use. The Geissele Ultra Duty LPK includes our Maritime Bolt Catch, famous for its aggressive texturing and extended paddles, and our Ambidextrous Super Configurable Safety, which features the ability to easily and securely swap and exchange the safety levers plus provides the end user a satisfying and positive tactile feedback when the safe or fire position is engaged. The takedown pins and mag release button feature the same tank treading as the Maritime Bolt Catch, giving your rifle a tasteful and cohesive look. Included in the Ultra Duty LPK is Geissele’s Ultra Precision Trigger Guard, 5-axis machined out of a solid block of billet 7075 -T6 aluminum and Type-3 hardcoat anodize to ensure that your build stands apart from any other.

High quality components and precise manufacturing make Geissele parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

The suppressor-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooter’s face when shooting suppressed. Its ambidextrous design allows rapid palm ”blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The Talon 45/90 ambidextrous safety selector is a modular design that can be installed as a standard 90 degree or as a 45 degree short throw by simply rotating the shaft 180 degree inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break.

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized. The Talon 45/90 ambidextrous safety selector is a modular design that can be installed as a standard 90 Degree or as a 45 Degree short throw by simply rotating the shaft 180 Degree inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized. The Talon 45/90 ambidextrous safety selector is a modular design that can be installed as a standard 90 Degree or as a 45 Degree short throw by simply rotating the shaft 180 Degree inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.