[wpb_wmca_accordion_pro id="10434"]

Hae tuotetta:

[wpdreams_ajaxsearchlite]

Kaikki tuotteemme

Radian, Raptor-LT/Talon, Charging Handle/Safety Combo

High quality components and precise manufacturing make Radian parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

Patriot Ordnance Factory, Tomahawk Ambi Charging Handle, .223

While the shape and laser engraving is inspired by the design of the POF-USA American Patriot Tomahawk, the Tomahawk Charging Handle has optimized functionality as well. For quick and efficient operation with either hand, It features over-sized levers on both sides to make palm blading or finger thumb charging a breeze.

Sons of Liberty Gun Works, Liberty Charging Handle, Charging Handle

The Liberty Charging Handle from Sons of Liberty Gun Works is designed to enhance both form and function in suppressed and unsuppressed rifles. It is ambidextrous, allowing smooth and consistent motion whether shooting with the strong or support side. The size and shape of the latches enable snag-free operation. The LCH features a raised lip at the rear that creates a seal at the back of the upper receiver to disrupt gas flow during suppressed fire.

Reptilia, Puller, Ambidextrous Charging Handle

Introducing the Puller ambidextrous charging handle. Designed at the request of a military end user, it is low profile, sturdy, and a must-have upgrade for any shooting style. It is made from billet 7075-T6 aluminum and finished with MIL-STD Type III, Class 2 hard anodize

Battle Arms Development, Rack Charging Handle, BAD ASS PRO Safety,

The RACK Ambidextrous Charging Handle was developed by BATTLEARMS to be the finest charging handle ever produced! It is the toughest available for the AR-15 and 9mm AR PCC platforms. The RACK charging handle is simplicity at its best with only three major components. Unlike other charging handles, the RACK makes no contact with the sides of the receiver preventing wear on the receiver and charging handle. Not only is it fast, buttery smooth, it also minimizes wear to the upper receiver with its side-sliding unlocking action. The RACK is no doubt the new heavyweight champion among all other ambidextrous charging handles. Engineered to withstand the abuse of downrange use!

Badger Ordnance, C1, Charging Handle, Fits AR-15

Badger Ordnance, C1, Charging Handle, Fits SR25/AR-10

Radian, Raptor Ambidextrous Charging Handle, AR15

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum.

Reptilia, Puller, Ambidextrous Charging Handle

Introducing the Puller ambidextrous charging handle. Designed at the request of a military end user, it is low profile, sturdy, and a must-have upgrade for any shooting style. It is made from billet 7075-T6 aluminum and finished with MIL-STD Type III, Class 2 hard anodize

Kinetic Development Group, LLC, Scarging Handle, SCAR Charging Handle, Black, Fits Non Reciprocating Charging Handle (NRCH) Models Only

The Scarging handle fits both 5.56 and 7.62 NATO versions of the NRCH FN Scar models and installs in seconds. The radius-faced design and swept geometry of the Scarging Handle allows the user to achieve a more solid grasp when manipulating the bolt. This allows for easier charging, clearing of stoppages, and administratively locking the firearm bolt to the rear. The shooter can choose between left or right-side installation to match their hand dominance and can rotate the Scarging Handle to either downward or upward sweep. The downward sweep protects the hand from busted knuckles due to optics mounts by keeping it down and away from the weapon’s top. This also has the added benefit of additional leverage gained, and increased grasping surface for larger hands or when wearing gloves. All Scarging Handles are constructed of low carbon steel and finished with black Nitride.

GG&G BERETTA 1301 Slotted Charging Handle

The factory bolt handle found on the Beretta 1301 is partially plastic. Why take the risk of having it fail or break, if by chance you encounter a barricade or obstacle with it? Especially during the high anxiety associated with a gunfight. Your failure to retract the bolt handle completely could lead to a catastrophic malfunction that is potentially fatal. We have improved the appearance and lightened our standard Beretta 1301 Tactical Charging Handle with the GG&G Beretta 1301 Slotted Tactical Charging Handle. Just remove the small factory bolt retracting handle and replace it with our Must Have Beretta 1301 Slotted Tactical Charging Handle.

Nordic Components, Benelli ”BFB” Big Fat Benelli Charging Handle

This shotgun bolt operating handle is compatible with Benelli M1/M2, SBE/SBE2/SBE3, Franchi Affinity/Intensity, and Remington Versa Max. Requires oval anti-rotation cutout in bolt.

GG&G, Inc, Slotted Charging Handle, Fits Benelli M4

The factory M4 bolt charging handle of the Benelli M4 Tactical shotgun is difficult to grasp during the stress and high anxiety associated with a gunfight. Failure to retract the bolt handle completely could lead to a catastrophic malfunction that could be fatal.

Radian, Raptor-LT, Ambidextrous, Light Weight

Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. Compatible with AR15/M16 -pattern rifles, the Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul color offerings.

Kinetic Development Group, LLC, Scarging Handle, SCAR Charging Handle, Black, Fits Non Reciprocating Charging Handle (NRCH) Models Only

The Scarging handle fits both 5.56 and 7.62 NATO versions of the NRCH FN Scar models and installs in seconds. The radius-faced design and swept geometry of the Scarging Handle allows the user to achieve a more solid grasp when manipulating the bolt. This allows for easier charging, clearing of stoppages, and administratively locking the firearm bolt to the rear. The shooter can choose between left or right-side installation to match their hand dominance and can rotate the Scarging Handle to either downward or upward sweep. The downward sweep protects the hand from busted knuckles due to optics mounts by keeping it down and away from the weapon’s top. This also has the added benefit of additional leverage gained, and increased grasping surface for larger hands or when wearing gloves. All Scarging Handles are constructed of low carbon steel and finished with black Nitride.

GG&G, Inc, Enhanced Charging Handle, Fits Remington 1100/1187

This GG&G Enhanced Charging Handle for Remington 1100 & 1187 Shotguns is perfect for shooters looking to gain an edge in competition by speeding up their reload time.

GG&G, Inc, Charging Handle, Tactical, Fits Benelli M1/M2/M3

This Benelli Charging Handle is specifically designed, tested and manufactured for the Benelli M1, M2, and M3 12ga shotguns. The Benelli Tactical Charging Handle is much larger than the factory Benelli M1 charging handle providing a more positive method of charging, especially in stress fire situations. Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress or when wearing gloves.

GG&G, Inc, Charging Handle, Tactical, Fits Benelli M4

The M4 Charging Handle is specifically designed, manufactured and tested for the Benelli M4 shotgun. The Benelli Tactical Charging Handle is much larger than the factory Benelli M4 charging handle providing a more positive method of charging, especially in stress fire situations. Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress or when wearing gloves.

GG&G, Inc, Angled Charging Handle for FNH SCAR Rifles

The GG&G SCAR Enhanced Charging Handle is angled downward so that it saves your knuckles when you charge the SCAR and clears the optics mounting hardware

Badger Ordnance, Tactical Latch, Fits AR Rifles, Generation 1

The Badger Ordnance Gen I Tactical Latch is the original charging handle enhancement! Designed to be used with all M16/AR-15, AR-10 and SR-25 series rifles. The Tactical Latch replaces the standard charging handle latch, allowing positive manipulation of the of the handle with either hand. Made from 4140 steel and Manganese Phosphate Parkerized finished.

Yankee Hill Machine Co, Latch

Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting.

Midwest Industries, Low Profile Gas Block, .750

The Midwest Industries micro gas block will fit under most commercially available hand guards.

TROY Industries, Gas Block, Low Profile, .750″

The Troy 0.750 Low-Profile Gas Block is made specifically for rifle barrels that have a 0.750 gas block seat. The low-profile design allows for clearance of most aftermarket rails that require a smaller gas block. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. The Troy low profile gas block fits tightly to the barrel using two set screws. Gas tube roll pin not included.

Sons of Liberty Gun Works, Liberty Gas Block, Gas Block, .750 Gas Port

Sons of Liberty Gun Works is a manufacturer of quality firearms and parts, perfect for your next build, next competition, or next line of defense. Their small parts fit most mil-spec firearms.

Timney Triggers, AR Calvin Elite Trigger, 1.5lb Pull Weight, Adjustable Shoe

Timney set the standard for aftermarket trigger upgrades for the AR/M4 rifle. This trigger features Ultra-reliable 5-pound hammer spring coupled with a crisp and zero creep 1.5-pound pull weight. Trigger shoes are adjustable for length of pull, cast and height for the ultimate in custom comfort and positive contact.